Check estimated delivery
Cellular Router, IoT, IoT Devices
Cellular Routers USR-G809-E
SKU: 5842-G809-E
₹24,780.00
incl. 18% GST
Availability: Available on backorder
Estimated Delivery: Estimated delivery in 2 to 4 weeks
For bulk orders or B2B inquiries, email us: sales@empere.in
4G Industrial cellular VPN router
Cellular Routers USR-G809-E Introduction of 4G Industrial cellular VPN router
Cellular Routers USR-G809-E is an industrial cellular VPN router that integrates 4G LTE, Wi-Fi, DIDO, serial port, Ethernet ports(4 LAN and 1 WAN) and VLAN,VPN technologies to provide state-of-the-art Internet connectivity and high-speed data access for equipment networking.
Features of Cellular Routers USR-G809-E
- Industrial design, metal enclosure , protection class IP30.
- Wide input voltage DC 9-36V,with reverse polarity protection.
- ESD, Surge, EFT/Burst protection.
- Supports 2G/3G/4G network all over the world ,supports APN / VPDN private network access.
- Supports 2.4GHz Wi-Fi, scaling more devices access, support wired and wireless connecting Internet.
- Compatible with 5.8GHz Wi-Fi (optional).
- Supports VPN(PPTP, L2TP, IP Sec, OpenVPN, GRE), and VPN encryption function, suitable for various networking and high-security requirements Scenarios.
Basic Functions
Abnormal alarm, monitoring at any time |
|
VLAN division, independent subnet |
|
Remote Management, Remote Access |
|
| Data Security, Multiple VPN |
|
| Wall Mounting and DIN-Rail Mounting |
|
Diverse applications without fear of complexity |
|
Applications
- Smart Agriculture
- Meteorological Monitoring Case
- Smart Store Solutions
|
Hardware Specifications |
||
| Cellular Interface | Antenna | 2x SMA-K Note: North America models: 2 x SMA 4G antenna connectors. |
| SIM card | 1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots | |
| Ethernet | 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection | |
| 4 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection | ||
| Indicators | LED | PWR: red,always on after powered on Work: green,blinking when the router is ready and working properly WLAN: green,always solid on when WiFi is enabled and working properly USR:user defined. Net indicator: Red always on after connected to 2G network Green always on after connected to 3G network Orange always on after connected to 4G network Signal strength：3 solid bars,strongest signal |
| Terminal block | Pinout | V+,V- : 2 cores terminal power supply socket,built-in power supply phase-reversal protection GND:groundterminal Tx/B:RS-232/RS485pin（setupby software） Rx/A:RS-232/RS485pin（setupby software） DI:2 x Digital input,passive switch DO:2 x Digital open collector output, max output 36 V, 300 mA COM: common terminal,use in conjunction with DOs |
| WiFi Interface | Standards & Frequency | IEEE 802.11b/g/n,2.4GHz, AP mode |
| Data speed | IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps | |
| Antenna | 2x RP-SMA-K | |
| Transmission distance | 80 meters by line of sight.Actual transmission distance depends on environment of the site. | |
| Power Supply | Adaptor | DC 12V/1A |
| Connector | DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or industrial terminal block,reverse polarity protection | |
| Input voltage | DC 9~36V | |
| Working power | Average 522mA/12V, Maximum 811mA/12V | |
| Serial Interface | RS485/RS232(alternative) | industrial terminal block.
Note:RS232 default. |
| Baud rate(bps) | 1200,2400,4800,9600,19200,38400,57600,115200,230400 | |
| Data bits | 8 | |
| Stop bits | 1,2 | |
| Parity | NONE,ODD,EVEN | |
| Physical Characteristics | Housing | Metal shell,IP30 |
| Dimensions | 125.0*103.0*45.0mm (L*W*H,antenna pedestal,terminal block and DIN Rail are not included) | |
| Installation method | Ear mounting, DIN-Rail mounting | |
| EMC | StaticIEC61000-4-2, level3 Pulsed Electric FieldIEC61000-4-4, level3 SurgeIEC61000-4-5, level3 |
|
| Operating temperature | -20℃～+70℃ | |
| Storage temperature | -40℃～+125℃ | |
| Operating humidity | 5%～95%RH（non-condensing） | |
| Others | Reload | Pinhole button,restore factory defaults/firmware resume/firmware upgrading with USB |
| TBD | Debug interface (TTL Level) | |
| USB | Firmware upgrading | |
| TF | TF card slot | |
| Ground protection | Screw | |
| Embedded Watchdog | Device runs self-detection, auto recovers from malfunctions | |
Leave a Reply