IoT, IoT Devices
5.8Ghz Wireless Bridge | ST508E
Availability:
1 in stock (can be backordered)
- Shell Protection
- PTP/PTMP
- IPOLL3 Protocol
- Built in Antenna
- Multicast enhancement
₹5,487.00
incl. GST
Availability: 1 in stock (can be backordered)
1 in stock (can be backordered)
Compare5.8Ghz Wireless Bridge ST508EÂ :
- ST508E is a high-performance and multi-purpose 5.8GHz wireless bridge product with Qualcomm core solution. High TX power, high-quality hardware and a built-in 8dBi directional antenna make it an ideal choice for short-range transmissions .
- It is recommended for the last 1 kilometer and the longest transmission distance can reach 2 kilometers. It is suitable for various video surveillance scenarios such as agriculture, forestry, industry, commerce, transportation , tower crane and elevator monitoring.
- The iPoll 3 intelligent dynamic polling protocol based on TDMA technology is well-known in the wireless industry for its excellent anti-interference ability. Even in high-density and severe interference scenarios, iPoll 3 can still ensure stable transmission and higher throughput. iPoll 3 supports wireless traffic optimization, the QoS priority supports DSCP mode under 802.1p, 4 priority queues is supported and the most complete support for multiple services has been provided.
- The design of the product meets the IP-64 waterproof level, and the temperature, humidity and other related indicators are in line with industrial standards, , along with the 2kv surge resistance design to protect equipment in complex electrical environments, the product has high reliability.
| Model | ST508E | ST515N |
| Description | Compact size 5Ghz wireless bridge | High performance 5Ghz wireless bridge |
| Input voltage | 12 – 24 VDC passive PoE | |
| Power adapter | 100 – 240 VAC | |
| Max power consumption | 4.5W | |
| Wi-Fi | ||
| Protocol | 802.11a/n, iPoll 3 | |
| Output Power | Up to 29 dBm (country dependent) | |
| Receive sensitivity | Varying between -97 and -75 dBm (modulation dependent) | |
| Frequency | 4.9Ghz ~ 6Ghz (country dependent) | |
| Channel bandwidth | 5/10/20/40Mhz | |
| MIMO | 2*2 | |
| Modulation schemes | 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) | |
| Max rate | 300Mbps | |
| Error correction | FEC, Selective ARQ | |
| Antenna | Built-in, 8dBi | Built-in, 15dBi |
| Coverage Distance | ||
| Point to point | Recommended: 1KM Max: 2KM |
Recommended: 3KM Max: 5KM |
| Point to multiple points(same model) | Recommended: 0.5KM Max: 1KM |
Recommended: 1KM Max: 3KM |
| Ethernet | ||
| Ethernet | 1*RJ45, 10/100M(PoE in) | |
| Software | ||
| Wireless operating modes | Access point (auto WDS), access point (iPoll 3), station (WDS, iPoll 3), station (ARP NAT) | |
| Wireless techniques | Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control (ATPC) | |
| Wireless security | WPA/WPA2 personal, WPA/WPA2 enterprise, WACL, user isolation | |
| Wireless SoS | 4 queues prioritization on iPoll 3 | |
| Network operating modes | Bridge, router IPv4, router IPv6 | |
| Network techniques | Routing with and without NAT, VLAN | |
| WAN protocols | Static IP, DHCP client, PPPoE client | |
| Service | DHCP server, SNMP, NTP client, router advertisement daemon, ping watchdog | |
| Management | HTTP(S) GUI, SSH, SNMP read, Telnet | |
| System monitoring | SNMP v1/2c/3 server, Syslogs, system alerts via e-mail and SNMP trap | |
| Wireless tools | Site survey, link test, antenna alignment | |
| Other | Scheduled reboot | |
| Physical Parameters | ||
| Dimension | 141*77.5*53mm(L*W*H) | 158*97*38mm(L*W*H) |
| Weight | 300g | 185g |
| IPÂ Protection | IP64 | IP66 |
| Installation | Pole Mounting, wall mounting | Pole Mounting |
| Operating Temperature | -40°C ~ +70°C | |
| Operating Humidity | 0 ~ 90 %(non-condensing) | |
Leave a Reply