Your query posted successfully. We will get back to you soon.
, ,

Serial to Ethernet Converters USR-N540-H7-4

Availability:

Backorder (Delivery in 2-4 Weeks)


4 Ports RS485 to Ethernet Converters

7,611.00

incl. GST

Availability: Backorder (Delivery in 2-4 Weeks)


Special price on bulk order

Secure Payment

Fast & Quick Delivery

Technical Support

Compare

Serial to Ethernet Converters USR-N540-H7-4 Introduction of 4 Ports RS485 to Ethernet Converters

Serial to Ethernet Converters USR-N540-H7-4 is a 4-port RS485 to ethernet Converters. USR IOT’s RS485 to ethernet Converters USR-N540 can realize bi-directional transparent transmission between RS485 and network.

Features of Serial to Ethernet Converters USR-N540-H7-4

● Independent 4 RS485 ports. (3-in-1 Serial port RS232/RS485/RS422 Optional)
● 5-36V wide voltage input.
● Modbus RTU to Modbus TCP, Modbus Polling, Modbus to JSON
● Flow control XON/XOFF
● Secure Client Operation Mode: TCPS, HTTPS. MQTTS
● SSL/TLS Encryption
● Modbus RTU Master, Edge computing
● Hardware watchdog, automatically restarts when the device goes down

Basic Function

  • Scheme upgrade to provide better experience – Master chip adopts ST crotex-M7 core, the main frequency is up to 400Mhz,
    fast processing speed, high stable and reliable performance.
  • Multiple hardware protection.
  • Redundant Power Supply – Wide input voltage DC 5-36V,with reverse polarity protection.

Work mode

  • TCP Server
    • The server listens to the specified port and waits for the TCP client to connect, the data sent by the serial device will be transparently transmitted to all successfully connected clients through the serial device server.
  • TCP Client
    • The serial device server initiates a TCP connection to the specified IP address.
    • If the connection fails, the serial server will continue to try to reconnect until it succeeds.
    • If the connection is successful, the server can transparently transmit data with the serial device in two-way.
  • UDP Mode
    • The serial device server sends the data of the serial device to the designated IP network device.
    • The serial device server monitors the port meanwhile and forwards all received data to the serial device.
  • HTTPD Client
    • Serial port data can be submitted to a specified server by GET or POST method.

Application

  • Charging pile application case.
  • Industrial automation application case
  • Unattended weighing
SKU: Converter USR-N540-H7-4 Categories: , ,
System Information
Processor ST Cortex-M7
Basic Frequency 400MHz
Flash 128K+4M byte
Ethernet
Port Number 1
Interface Standard 8 pin RJ45
Rate 10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection
Protection 2KV electromagnetism isolation, shell insulation blocking
Network Protocol IP,TCP,UDP,DHCP,DNS,https,ARP,ICMP,Web socket,httpsd client
Receive Buffer Max 16k bytes buffer
Serial
Port Number 4  RS485 Ports, can work at the same time)
Interface Standard RS-485: 2 wire (A+,B-) half-duplex
Data Bits 7,8
Stop Bit 1,2
Parity Bit Even,Odd
Baud Rate 600bps ~ 921600 bps
Flow Control  XON XOFF
Buffer Send and receive 2k bytes respectively
Protection RS-485: anti-static 2KV,lightning protection
RS-485 Pull-up and Pull-Down Resistor 2.2 KΩ
Software
Virtual Serial(USR-VCOM) Windows 2000 or higher(32 bit/64 bit)
Configuration Built-in webpage, computer set-up software, serial command
Basic Parameter
Size 222 x 122 x 29 mm (including shell and terminals)
Operating Temp. -40 ~ 85°C (industry)
Storage Temp. -40 ~ 85°C, 5 ~ 95% RH (no condensation)
Input Voltage DC 9 ~ 36V
Working Current 53mA @ 12V
Power <1W

Leave a Reply

Your email address will not be published. Required fields are marked *

Bulk Enquiry

Name

Phone*

Email*

Comment

This will close in 0 seconds