Check estimated delivery
8051 8-Bit MCU, Micro-Controllers
Megawin 8051 MCU MG82F6D16AE28
SKU: Megawin 8051 MCU MG82F6D16AE28
₹590.00(₹ 59.00/each)
₹500 + 18% GST
incl. GST
Pack of 10pcs
Availability: In Stock (70 units)
Estimated Delivery: Usually ships within 2-3 business days
For bulk orders or B2B inquiries, email us: sales@empere.in
1T 8051 MCU
Operating Voltage: 1.8-5.5V
Flash ROM : 16KB
Data RAM : 256B
IO’s : 25
Timer : 3+RTC
Communication : UARTx2, SPI, LIN, I2C, S/W I2C, CRC16
Package : DIP-28
- 1-T 80C51 Central Processing Unit
- MG82F6D16 with 16K Bytes flash ROM
- ━ ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB
- ━ Flexible IAP size configured by software
- ━ Code protection for flash memory Access
- ━ Flash write/erase cycle: 20,000
- ━ Flash data retention: 100 years at 25°C
- ━ Default MG82F6D16 Flash space mapping
- AP Flash default mapping (13.5KB, 0000h~35FFh)
- IAP Flash default mapping (1.0KB, 3600h~39FFh)
- ISP Flash default mapping (1.5KB, 3A00h~3FFFh), ISP Boot code
- Data RAM: 1K Bytes
- ━ On-chip 256 bytes scratch-pad RAM
- ━ 768 bytes expanded RAM (XRAM) for 6D16
- ━ Support page select on XRAM Access in 6D16
- Dual data pointer
- Interrupt controller
- ━ 14 sources, four-level-priority interrupt capability
- ━ Three external interrupt inputs, nINT0, nINT1 and nINT2, with glitch filter
- ━ All external interrupts support High/Low level or Rising/Falling edge trigger
- Total 6 timers in MG82F6D16
- ━ RTC Timer and WDT Timer
- ━ Timer 0, Timer 1 and Timer 2
- ━ PCA0, Program Counter Array 0
- ━ If Timer 2 in split mode, then total 7 timers
- Maximum 25 GPIOs in 28-pin package
- ━ P3 can be configured to quasi-bidirectional, push-pull output, open-drain output and input only
- ━ P0, P1, P2, P4 and P6 can be configured as open-drain output or push-pull output
- ━ P6.0, P6.1 and P4.7 shared with XTAL2, XTAL1 and RST
- ━ Programmable GPIO driving strength
- ━ On chip pull-up enable on each pin
Leave a Reply