Check estimated delivery
Current Sensor, Sensors
Winson WCS1600 Through Hole Current Sensor
SKU: Sensor WCS1600
₹270 + 18% GST
Availability: In Stock (484 units)
Estimated Delivery: Usually ships within 2-3 business days
For bulk orders or B2B inquiries, email us: sales@empere.in
Hall Effect Base Linear Current Sensor
Through Hole Current Sensor WCS1600 Introduction
Through Hole Current Sensor WCS1600 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and communications systems. The unique package provides easy implementation without breaking original system and makes current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection and any intelligent power management system etc.…
The WCS1600 consists of a precise, low-temperature drift linear hall sensor IC with temperature compensation circuit and a diameter 9.0mm through hole. Users can use system’s own electric wire by pass it through this hole to measure passing current. This design allows system designers to monitor any current path without breaking or changing original system layout at all. Any current flowing through this hole will generate a magnetic field which is sensed by the integrated Hall IC and converted into a proportional
voltage.
The terminals of the conductive path are electrically isolated from the sensor leads. This allows the WCS1600 current sensor to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques and make system more competitive in cost.
Feature
- Diameter 9.0mm conductor through hole.
- Output voltage proportional to AC and DC current.
- Wide sensing current range 0~100A at 5V volt.
- High sensitivity 22mV/A.
- Wide operating voltage range 3.0~12 V.
- Low operating current 3mA.
- Isolation voltage 4000V.
- Ratio metric output from supply voltage.
- 23K Hz Bandwidth.
- Two bronze sticks for easy soldering on PCB.
| Characteristic | Symbol | Test Conditions | Min | Typ | Max | Units |
| Supply Voltage | Vdd | – | 3.0 | – | 12 | V |
| Supply Current | Isupply | IP =0 A | – | 3.5 | 6.0 | mA |
| Zero Current Vout | V0G | IP =0 A(DC Mode) | 2.4 | 2.5 | 2.6 | V |
| Conductor Through Hole | – | – | – | 9.0 | – | mm2 |
| Sensitivity | Sens | IP= +-10 A | 18 | 22 | 25 | mV/A |
| Bandwidth | BW | – | – | 23 | – | kHz |
| Measurable Current Range | MR | Vdd=5V (DC Mode) | – | ±100 | – | A |
| Vdd=5V(AC RMS) | – | 70 | – | |||
| Temperature Drift | Vout | Ip =0 A | – | ±0.3 | – | mV/℃ |
| Output Noise | VNp-p | Ip =0 A | – | 5 | – | mV |
| VNp-p(0.01uF) I | Ip =0 A, C = 0.01uF | – | 1 | – |
Leave a Reply