Your query posted successfully. We will get back to you soon.
,

Through Hole Current Sensor WCS1500

Availability:

4 in stock (can be backordered)


Hall Effect Base Linear Current Sensor

200.00

4 in stock (can be backordered)

Through Hole Current Sensor WCS1500 Introduction

Through Hole Current Sensor WCS1500 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and communications systems. The unique package provides easy implementation without breaking original system and makes current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection and any intelligent power management system etc…

The WCS1500 consists of a precise, low-temperature drift linear hall sensor IC with temperature compensation circuit and a diameter 9.0mm through hole. Users can use system’s own electric wire by pass it through this hole to measure passing current. This design allows system designers to monitor any current path without breaking or changing original system layout at all. Any current flowing through this hole will generate a magnetic field which is sensed by the integrated Hall IC and converted into a proportional
voltage. The terminals of the conductive path are electrically isolated from the sensor leads. This allows the WCS1500 current sensor to be used in applications requiring electrical isolation without the use of opto-isolators or the other costly isolation techniques and make system more competitive in cost.

Features

  • Diameter 9.0mm conductor through hole.
  • Output voltage proportional to AC and DC current.
  • Wide sensing current range 0~200A at 5V volt.
  • High sensitivity11mV/A.
  • Wide operating voltage range 3.0~12 V.
  • Low operating current 3mA.
  • Isolation voltage 4000V.
  • Ratio metric output from supply voltage.
  • .23K Hz Bandwidth.
  • Two bronze sticks for easy soldering on PCB.
SKU: Sensor WCS1500 Categories: ,
Characteristic Symbol Test Conditions Min Typ Max Units
Supply Voltage Vdd 3.0 12 V
Supply Current Isupply IP =0 A 3.5 6.0 mA
Zero Current Vout V0G IP =0 A(DC Mode) 2.4 2.5 2.6 V
Conductor Through Hole 9.0 mm2
Sensitivity Sens IP= +-10 A 9 11 13 mV/A
Bandwidth BW 23 kHz
Measurable Current Range MR Vdd=5V (DC Mode) ±200 A
Vdd=5V(AC RMS) 150
Temperature Drift Vout Ip =0 A ±0.2 mV/℃
Output Noise VNp-p Ip =0 A 2.5 mV
VNp-p(0.01uF) I Ip =0 A, C = 0.01uF 1

 

Download

Datasheet

Leave a Reply

Your email address will not be published. Required fields are marked *

Name
Phone*
Email*
Comment