Soil Sensor JXBS-3001-TR-RS

Soil Sensor JXBS-3001-TR-RS Introduction

Soil Sensor JXBS-3001-TR-RS soil moisture temperature sensor is suitable for soil temperature and moisture measurement. Compared with the German original high-precision sensor and the actual soil drying and weighing method, the soil moisture temperature sensor has high accuracy, fast response and stable output. Less affected by soil salt content, suitable for all kinds of soil. Can be buried in soil for a long time, resistant to long-term electrolysis, corrosion resistance, vacuum potting, completely waterproof.

Methods of Testing

• Speed measurement method
  • Select a suitable measurement site, avoid the stones, ensure that the steel needle does not hit a hard object, throw the topsoil at the required depth of measurement,
    keep the underlying soil tight, grip the sensor vertically into the soil, insert It is not allowed to shake right and left. It is recommended to measure multiple times within a small range of a measurement point to obtain the average value.
• Buried Method
  • Dig a pit with a diameter of >20 cm vertically and insert the sensor steel needle horizontally into the pit wall at a given depth. After the pit is buried tightly and stable
    for a period of time, measurement and recording can be performed for days, months, or even longer.

Precautions

• Steel needle needs to be thoroughly embedded in the ground.
• Attempt to prevent direct sunlight from heating up the sensor.
• In the field, exercise vigilance to avoid lightning strikes.
• Do not beat or aggressively hit the sensor. Do not forcefully remove the sensor lines. Do not violently bend the steel needle.
• With an IP68 rating for protection, the sensor can be submerged in water.
• It shouldn’t be in a state of power in the air for a long period because radio frequency electromagnetic radiation is present there.