Home IoT IoT Modules Ethernet Module Serial to Ethernet USR-TCP232-T2
Your query posted successfully. We will get back to you soon.
Ethernet Module , IoT , IoT Modules Serial to Ethernet USR-TCP232-T2
Availability:
199 in stock (can be backordered)
Serial to Ethernet Converter Modules | Ethernet UART Modules
₹ 944.00
₹800 + 18% GST
incl. GST
Availability: 199 in stock (can be backordered)
199 in stock (can be backordered)
Compare
Serial to Ethernet USR-TCP232-T2Â Introduction of Modules
Serial to Ethernet USR-TCP232-T2 Serial to Ethernet converter module can realize
data bidirectional transparent transmission between serial TTL and RJ45 Port. USR-TCP232-T2 is based on Cortex-M0 core. It has characters of low power, fast speed, and high efficiency.
Features of Serial to Ethernet USR-TCP232-T2Â
DHCP &DNS, automatically obtain an IP address and query IP address through serial setting protocol.
Set parameters through webpage and serial AT command.
Upgrade firmware via network.
Auto-MDI/MDIX, RJ45 port with 10/100Mbps.
Serial port baud rate from 600 bps to 460.8 Kbps, Check bit of None, Odd, Even, Mark and Space.
Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HttpD Client.
Support virtual serial port and provide corresponding software USR-VCOM.
Heartbeat package mechanism to ensure connection is reliable, put an end to dead link.
User-defined registration package mechanism, check connection status and use as custom packet header.
Under TCP Server mode, Client number ranges from 1 to 16; default number is 4.
The global unique MAC address bought from IEEE, user can define MAC address.
Restore factory default.
Across the gateway, switches, routers.
Can work in LAN, also can work in the Internet (external network).
Provide PC TCP/IP socket programming example such as VB,C++,Delphi, Android and IOS.
Support customization
Serial UART Ethernet Module – M0 Series
Solution
Cost-Effective, -25~75C
Keep-Alive
Detect the inactive connection, rebuild connection automatically
Built-In Webpage
Configure parameters
DHCP+DNS
DNS and DHCP automatically obtain an IP address
Firmware
Upgrade firmware via network
Client connection
Support 1 to 16 clients to be connected in TCP server mode
Application Field of Serial UARTÂ Ethernet Modules
Industrial data transmission, industrial automation.
Security and protection monitoring, public security.
Smart home, power control, environmental monitoring, intelligent agriculture.
Door check on work attendance system, POS system, rice selling system.
Building automation system, power monitoring, self-service banking system, telecom machine room monitoring.
System Information
Processor
ARM
Flash
32K byte
Ethernet
Port Number
1
Interface Standard
RJ45
Rate
10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection
Protection
2KV electromagnetism isolation
Network Protocol
IP, TCP, UDP, DHCP, DNS, https, ARP, ICMP
Buffer
Send: 6K bytes, receive: 4K bytes
Serial
Port Number
1
Interface Standard
TTL
Data Bits
5, 6, 7, 8
Stop Bit
1, 2
Check Bit
None, Even, Odd, Space, Mark
Baud Rate
600 bps ~ 460.8 Kbps
Flow Control
Null
Buffer
Receive: 800 bytes
RS-485 Pull-up and Pull-Down Resistor
Null, reserved 485 send-receive control pin
Software
Virtual Serial(USR-VCOM)
Windows 2000 or higher (32 bit/64 bit)
Configuration
computer set-up software, serial command, built-in webpage, AT command
Basic Parameter
Size
50.5 x 22.6 x 15.0 mm
Operating Temp.
-25~ 75°C
Storage Temp.
-40 ~ 105°C, 5 ~ 95% RH
Input Voltage
VCC DC 3.0V~3.6V
VDD DC 4.75~7.0V
Working Current
150mA (aver) / 160mA (max) @3.3V
150mA (aver) / 160mA (max) @5V
Power
<1W
Leave a Reply