Check estimated delivery
Current Sensor, Sensors
Winson WCS2800 Through Hole Current Sensor
SKU: Sensor WCS2800
₹270 + 18% GST
Availability: Available on backorder
Estimated Delivery: Estimated delivery in 2 to 4 weeks
For bulk orders or B2B inquiries, email us: sales@empere.in
Hall Effect Base Linear Current Sensor
Through Hole Current Sensor WCS2800 Introduction
Through Hole Current Sensor WCS2800 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and communications systems. The unique package provides easy implementation without breaking original system and make current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection and any intelligent power management system etc.…
The WCS2800 consists of a precise, low-temperature drift linear hall sensor IC with temperature compensation circuit and a 14X10mm 2 through hole. Users can use system’s own electric wire by pass it through this hole to measure passing current. This design allow system designers to monitor any current path without breaking or changing original system layout at all. Any current flowing through this hole will generate a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage.
The terminals of the conductive path are electrically isolated from the sensor leads. This allow the WCS2800 current sensor to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques and make system more competitive in cost.
Features
- Diameter 9.0 mm conductor through hole.
- Output voltage proportional to AC and DC current.
- Wide sensing current range 0~ 35 A at 5V volt.
- High sensitivity 6 6 mV/A.
- Wide operating voltage range 3.0~12 V.
- Low operating current 3mA.
- Isolation voltage 4000V.
- Ratio metric output from supply voltage.
- 23K Hz Bandwidth.
- Two bronze sticks for easy soldering on PCB.
| Characteristic | Symbol | Test Conditions | Min | Typ | Max | Units |
| Supply Voltage | Vdd | – | 3.0 | – | 12 | V |
| Supply Current | Isupply | IP =0 A | – | 3.5 | 6.0 | mA |
| Zero Current Vout | V0G | IP =0 A(DC Mode) | 2.3 | 2.5 | 2.7 | V |
| Conductor Through Hole | – | – | – | 14 x 10 | – | mm2 |
| Sensitivity | Sens | IP= +-10 A | 60 | 70 | 80 | mV/A |
| Bandwidth | BW | – | – | 23 | – | kHz |
| Measurable Current Range | MR | Vdd=5V (DC Mode) | – | ±35 | – | A |
| Vdd=5V(AC RMS) | – | 25 | – | |||
| Temperature Drift | Vout | Ip =0 A | – | ±1.0 | – | mV/℃ |
| Output Noise | VNp-p | Ip =0 A | – | 15 | – | mV |
| VNp-p(0.01uF) I | Ip =0 A, C = 0.01uF | – | 3 | – |
Leave a Reply