8051 8-Bit MCU, Micro-Controllers
Megawin 8051 MCU MG82F6D32AD
Availability:
Backorder (Delivery in 2-4 Weeks)
| 1T 8051 MCU Flash ROM: 32 KB RAM: 2048B IO’s : 44 Timer: 4+RTC Communication : UART x 2, SPI, TWI(I2C) x 2, STWI, LIN CRC16 Packages : LQFP-32, LQFP-48, QFN-32 |
₹88.50
incl. GST
Availability: Backorder (Delivery in 2-4 Weeks)
Compare- 1-T 80C51 Central Processing Unit
- MG82F6D32 with 32K Bytes flash ROM
- ━ ISP memory zone could be optioned as 0.5KB/1.0KB~7.5KB
- ━ Flexible IAP size by software configured
- ━ Code protection for flash memory access
- ━ Flash write/erase cycle: 20,000
- ━ Flash data retention: 100 years at 25°C
- ━ Default MG82F6D32 Flash space mapping
- AP Flash default mapping (29.5KB, 0000h~75FFh)
- IAP Flash default mapping (1.0KB, 7600h~79FFh)
- ISP Flash default mapping (1.5KB, 7A00h~7FFFh), ISP Boot code
- Data RAM:
- ━ On-chip 256 bytes scratch-pad RAM
- ━ MG82F6D32 – 1792 bytes expanded RAM (XRAM)
- ━ Support page select on XRAM access
- Dual data pointer
- External Memory Bus interface (EMB)
- ━ Only support No Address mode access (LCD 8080 I/F)
- Provide one channel DMA engine
- ━ P2P, M2P, P2M
- ━ Memory target: on-chip XRAM & EMB
- ━ Peripheral target: UART0/1/2/3, SPI, TWI0/I2C0, I2C1, ADC12, EMB & CRC16
- ━ Timer 5 and Timer 6 are used for DMA, but it also can be traded as independent timer when DMA not in use
- Interrupt controller
- ━ 24 sources, four-level-priority interrupt capability
- ━ Four external interrupt inputs, nINT0, nINT1, nINT2 and nINT3 with glitch filter
- ━ All external interrupts support High/Low level or Rising/Falling edge trigger
- total 13/15(with split mode) timers in MG82F6D32
- ━ RTC Timer and WDT Timer
- ━ Timer 0, Timer 1, Timer 2, Timer 3 and Timer 4 (Timer 4 not support by MG82F6D32)
- ━ PCA0, Program Counter Array 0
- ━ S0 BRG, S1 BRG, S2 BRG and S3 BRG
- ━ If Timer 2/3/4 in split mode, MG82F6D32 has total 15 timers
- ━ Timer 5/6 of DMA module also can be used as timer
- 7 16-bit timer/counters, Timer 0, Timer 1, Timer 2, Timer 3, Timer 5, Timer 6
- ━ X12 mode and timer clock output function
- ━ Synchronous control of Run-Enable, Stop and Reload on Timer 0~4
- ━ New 5 operating modes in Timer 2/3/4 with 8 clock sources and 8 capture sources
- ━ Timer 2/3/4 can be split to two 8-bit timers
- ━ Clock Count Output (CCO) on T2CKO, T3CKO
- ━ Timer 0~4 support PWM mode
- ━ Timer 2/3/4 support Duty Capture function
Leave a Reply