Your query posted successfully. We will get back to you soon.
,

Current Sensor WCS2705

Availability:

Available on backorder


Hall Effect Base Linear Current Sensor

200.00

Available on backorder

Current Sensor WCS2705 Introduction

Current Sensor WCS2705 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and communications systems. The unique package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, over-current fault detection and any intelligent power management system etc.…

The WCS2705 consists of a precise, low-temperature drift linear hall sensor IC with temperature compensation circuit and a current path with 8.3 mΩ typical internal conductor resistance. This extremely low resistance can effectively reduce power loss, operating temperature and increase the reliability greatly. Applied current flowing through this conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. The terminals of the conductive path are electrically isolated from the sensor leads. This allow the WCS2705 current sensor to be used in applications requiring electrical isolation without the use of opto-isolators or
other costly isolation techniques and make system more competitive in cost.

Features

  • Low noise analog signal path.
  • 8.3 mΩ internal conductor resistance.
  • Output voltage proportional to AC and DC current.
  • Min. sensing current 0~5.0A at 5V voltage supply.
  • High Sensitivity 260 mV/A.
  • Wide operating voltage range 3.0~12 V.
  • Low operating current 3mA.
  • Nearly zero magnetic hysteresis.
  • Ratio metric output from supply voltage.
  • 10K Hz bandwidth.
  • Isolation voltage 1000V.
SKU: Sensor WCS2705 Categories: ,
Characteristic Symbol Test Conditions Min Type Max Units
Supply Voltage Vdd 3.0 12 V
Supply Current Isupply IP = 0 A 3.5 6.0 mA
Zero Current Vout V0G IP = 0 A 2.4 2.5 2.6 V
Primary Conductor Resistance Rprimary IP = 5 A 8.3
Sensitivity △Vout IP=±5.0A 220 260 300 mV/A
Bandwidth BW 10 kHz
Measurable Current Range MCR Vdd= 5V(DC Mode) ±7.5 A
Vdd= 5V(AC RMS) 5.0
Temperature Drift △Vout IP=0A ±0.5 mV/0C
Output Noise VNp-p IP=0A 7.5 mV
VNp-p(0.01uF) IP=0A,C=0.01uF 1

Download

Datasheet

Leave a Reply

Your email address will not be published. Required fields are marked *

Name
Phone*
Email*
Comment